Interface Influence on Moisture Transport in Building Components

(0) Erste Bewertung abgeben
20%
CHF 57.60 Sie sparen CHF 14.40
Print on Demand - Auslieferung erfolgt in der Regel innert 4 bis 6 Wochen.
Kartonierter Einband

Beschreibung

The knowledge of moisture migration inside building materials and construction building components is decisive for the way they behave when in use. The durability, waterproofing, degrading aspect and thermal behaviour of these materials are strongly influenced by the existence of moisture within their interior, which provoke changes in their normal performance, something that is normally hard to predict. Due to the awareness of this problem, the scientific community have per-formed various studies about the existence of moisture inside porous materials. The complex aspects of moisture migration phenomenon tended to encompass monolithic building elements, since the existence of joints or layers contributes to the change of moisture transfer along the respective building element that contribute to the change of mass transfer law. The presentation of an experimental analyses concerning moisture transfer in the interface of material that makes up masonry is described in such a way as to evaluate the durability and/or avoid building damages.

In this work it was analysed, during the wetting process, the influence of different types of interface, commonly observed in masonry, such as: perfect con-tact, joints of cement mortar, lime mortar, and the air space interface. The results allow the calculation of the hygric resistance. With these results, it is possible to use any advanced hygrothermal simulation program to study the water transport in building elements, considering different interfaces and their hygric resistance.



Shows how to calculate the hygric resistance

Insides on water transport in building elements

Content helpful to avoid building damages



Inhalt

Preface

1. Introduction

1.1 Motivation

1.2 Objectives and methodology

1.3 References

2. State-of-the-Art

2.1 Introduction

2.2 Moisture and interface is building components

2.2.1 Moisture transport in buildings

2.2.2 Numerical methods

2.2.3 Interface influence on moisture transport

2.3 References

3. Moisture Content Determination

3.1 Introduction

3.2 Gravimetric method

3.3 Nuclear Magnetic Resonance (NMR) method

3.4 X-Ray analysis

3.5 Gamma ray attenuation method

3.5.1 Measurement principles

3.5.2 Setup

3.5.2.1 Radioactive source collimator

3.5.2.2 Detector

3.5.2.3 Measuring electronics

3.5.2.4 Metal support structure

3.5.2.5 Stabilizer

3.5.2.6 Calculation of the attenuation coefficient

3.5.2.7 Preparation of test specimens

3.5.3 Difficulty and limitations

3.5.4 Example of moisture content profiles

3.6 References

4. Interface Influence during the Wetting Process

4.1 Introduction

4.2 Preparation of the specimens

4.3 Results and discussion

4.3.1 Hydric resistance

4.3.1.1 Gravimetric Method

4.3.1.2 Gamma Ray

4.3.2 Synthesis

4.4 References

5. Conclusions

Mehr anzeigen

Produktinformationen

Titel
Interface Influence on Moisture Transport in Building Components
Untertitel
The Wetting Process
Autor
EAN
9783030308025
ISBN
3030308022
Format
Kartonierter Einband
Herausgeber
Springer International Publishing
Genre
Maschinenbau
Anzahl Seiten
72
Gewicht
125g
Größe
H235mm x B155mm x T4mm
Jahr
2019
Untertitel
Englisch
Auflage
1st ed. 2020
Mehr anzeigen
Andere Kunden kauften auch